HALT THE WATER FLOW: HOW TO TURN OFF YOUR WATER MAIN

Halt the Water Flow: How to Turn Off Your Water Main

Halt the Water Flow: How to Turn Off Your Water Main

Blog Article

Call Today

Nearly everybody maintains their own conception involving How to Find and Shut Off Main Water Shutoff Valve.


How to Locate & Turn Off Main Water Shut-Off Valves
If you try to close the water off to your components by using an angle quit and that doesn't work you will need to shut of the water main to make your fixing. There are additionally lots of various other factors you may require to close the water pipe like fixing icy pipelines, repairing leakages, replacing fixtures or faucets.
Many people are not aware that they also have a water main valve right in their very own home and also simply call a plumber of never wind up doing the repair service up until points obtain really poor because they just do not know that shutting the water main is truly very easy.
One of the most common places a water main will be located in residence remains in your boiler room, cellar, or an eliminated panel in an area for your residence.
When you find the water pipe you will simply turn the valve clockwise to close all the water off in your house until you have actually ended up the repair work. Some residences will certainly enjoy valve with a lever that you can pull as opposed to turn to shut the water off.

How to Find and Shut Off Main Water Shutoff Valve


Where is the main water shutoff valve located?


This is the million-dollar question. Your main water shutoff valve could be located in several different areas. If you have a home with a basement and crawlspace, it is probably located on an interior wall near the front of the house, where the water comes in from the water meter. In this case, it is most likely hiding in plain sight. If your home was built on a slab, the valve might be located near the hot water heater or inside your garage.


How to Turn Off Main Water Valve


Once you find the shutoff valve you will either hand turn it (clockwise for gate valves and perpendicular to the pipe for ball valves) or use the appropriate tool depending on the design.


If it is located inside your house, it will most likely be a gate or “wheel” valve that you’ll simply turn clockwise to stop the flow of water. Another way to shut off the water is to go to the water meter box. Just be careful not to mess with the city shutoff side of the meter.


Where are the isolation valves?


Isolation shutoff valves are much easier to locate. Most essential home plumbing fixtures have separate valves that control the water flow. Sinks, toilets, water heaters, and washing machines should have a small valve located near the plumbing that can easily shut off the individual water supply.


Simply turning the valve clockwise will turn off the water flow. Sink and toilet problems can be dealt with quickly by simply shutting off the supply this way. It’s always good to test the isolation valves periodically to make sure they are working properly.



Again, once your tighten the water shutoff valves and turn off the water, open up your hot and cold lines to release pressure and test if the water is indeed off.



Make it a priority to locate the water valves in your home – and keep plumbing problems from turning into costly repair situations.

https://happyhiller.com/blog/how-to-find-shut-off-main-water-shutoff-valve/


How to Turn Off Water To House and Prevent Damage

Hopefully you enjoyed reading our excerpt about How to Turn Off Water To House and Prevent Damage. Thanks for taking time to read through our article post. Enjoyed reading our article? Please share it. Let other people find it. Thanks for your time invested reading it.


Drain woes? Connect.

Report this page